- Home
- Products
- Technical Data
- Basic Information
- Accessories
- Downloads
- SERIAL
Short description
Bus controller | POWERLINK (V1/V2) controlled node with compact link selector |
General information
B&R ID code | 0x2674 |
Status indicators | Module status, bus function |
Diagnostics | |
Module status | Yes, using LED status indicator and software |
Bus function | Yes, using LED status indicator and software |
Support | |
Dynamic node allocation (DNA) | Yes |
Power consumption | |
Bus | 2 W |
Additional power dissipation caused by actuators (resistive) [W] | - |
Certifications | |
CE | Yes |
UKCA | Yes |
ATEX | Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
UL | cULus E115267 Industrial control equipment |
HazLoc | cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
DNV | Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck) |
LR | ENV1 |
KR | Yes |
ABS | Yes |
BV | EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck |
EAC | Yes |
KC | Yes |
Interfaces
Electrical properties
Electrical isolation | POWERLINK isolated from bus and I/O |
Operating conditions
Mounting orientation | |
Horizontal | Yes |
Vertical | Yes |
Installation elevation above sea level | |
0 to 2000 m | No limitation |
>2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
Degree of protection per EN 60529 | IP20 |
Ambient conditions
Temperature | |
Operation | |
Horizontal mounting orientation | -25 to 60°C |
Vertical mounting orientation | -25 to 50°C |
Derating | - |
Storage | -40 to 85°C |
Transport | -40 to 85°C |
Relative humidity | |
Operation | 5 to 95%, non-condensing |
Storage | 5 to 95%, non-condensing |
Transport | 5 to 95%, non-condensing |
Mechanical properties
![X20BC8084 | B&R Industrial Automation (1) X20BC8084 | B&R Industrial Automation (1)](https://i0.wp.com/www.br-automation.com/fileadmin/X20BC8084.right-2c806a88.jpg)
Material number:
X20BC8084
Description:
- POWERLINK
- I/O configuration and firmware update via the fieldbus
- Integrated compact link selector function
- 2 active hub expansion modules can be connected to the bus controller
- Redundant supply possible
The bus controller makes it possible to connect X2X Link I/O nodes to POWERLINK. It is also possible to operate the X2X Link cycle synchronously 1:1 or synchronous to POWERLINK using a prescaler.
POWERLINK is a standard protocol for Fast Ethernet equipped with hard real-time characteristics. The POWERLINK Standardization Group (EPSG) ensures that the standard remains open and is continually developed:: www.ethernet-powerlink.org.
Systems with redundant cabling can be implemented easily using POWERLINK. Unlike ring redundancy, cable redundancy does not require cable looping, which can sometimes be problematic. This allows the creation of all types of tree structures. When using a device with the link selector function, data is always transferred via the highest quality network lines. The link selector function is integrated in the bus controller.
Further information:
Technology information: Redundancy
User's manual: Redundancy for control systems
Mandatory Accessories
System modules for bus controllers
X20BB80 | X20 bus base, for X20 base module (BC, HB, etc.) and X20 power supply module, X20 end cover plates (left and right) X20AC0SL1/X20AC0SR1 included |
X20PS9400 | X20 power supply module, for bus controller and internal I/O power supply X2X Link power supply |
X20PS9402 | X20 power supply module, for bus controller and internal I/O power supply, X2X Link supply, supply not galvanically isolated |
System modules for expandable bus controllers
X20BB82 | X20 bus base, for X20 base module (BC, HB, etc.) and X20 power supply module, with 2 expansion slots for 2 X20 add-on modules (IF, HB, etc.), X20 end cover plates (left and right) X20AC0SL1/X20AC0SR1 included |
Terminal blocks
X20TB12 | X20 terminal block, 12-pin, 24 VDC keyed |
Optional Accessories
System modules for X20 redundancy systems
X20HB2885 | X20 hub expansion module, integrated active 2-port hub, 2x RJ45 |
X20HB2886 | X20 hub expansion module, integrated active 2-port hub, 2x fiber optic connections |
Automation Studio HW Upgrades | Version (Date) | Download |
---|---|---|
V2.6 HW Upgrade (X20BC8084) | EXE / 2 MB Login for download | |
V3.0 HW Upgrade (X20BC8084) | EXE / 2 MB Login for download | |
V4.0 HW Upgrade (X20BC8084) | EXE / 2 MB Login for download |
Certificates | Version (Date) | Download |
---|---|---|
244665 CSA HazLoc CoC X20, X67 | PDF / 158 KB Login for download | |
ABS Certificate of Product Design Assessment - X20 IO Series | PDF / 2 MB Login for download | |
BV Type Approval Certificate - X20 | PDF / 556 KB Login for download | |
Compass Safe Distance Certificate - X20 | PDF / 1 MB Login for download | |
DNV Type Approval Certificate - X20 | PDF / 194 KB Login for download | |
E115267 UL CoC X20 | PDF / 1 MB Login for download | |
EU Declaration ATEX X20 | PDF / 218 KB Login for download | |
EU Declaration of conformity PLC X20 | PDF / 169 KB Login for download | |
FTZU 09 ATEX 0083X | PDF / 771 KB Login for download | |
KR Type Approval Certificate MIL39390-AC003 (X20 System) | PDF / 758 KB Login for download | |
Lloyds Register | PDF / 502 KB Login for download | |
RINA Type Approval Certificate - X20 / Power Panel T30 | PDF / 1 MB Login for download | |
UK Declaration PLC X20 | PDF / 151 KB Login for download | |
X20 Certificate of type approval | PDF / 285 KB Login for download | |
X20, X67 KC certificates | PDF / 6 MB Login for download |
Documentation | Version (Date) | Download |
---|---|---|
Data sheet X20(c)BC8084 | PDF / 2 MB Login for download | |
Installation- / EMC-Guide | PDF / 20 MB Login for download | |
POWERLINK Bus Controller User's Manual | PDF / 2 MB Login for download | |
Redundancy for control systems | PDF / 9 MB Login for download | |
X20 System User´s Manual | PDF / 7 MB Login for download |
E-CAD (Electro or EPLAN Templates) | Version (Date) | Download |
---|---|---|
X20 EPLAN P8 from V2.4 | EXE / 160 MB Login for download |
M-CAD (Mechan. Templates) | Version (Date) | Download |
---|---|---|
3D File STEP/DXF X20BC and X20IF Module | ZIP / 1 MB Login for download |